Sadolin PV67 Heavy Varnish is a clear, fast drying two component acid-cataysed wooden floor varnish for interior use.

Sadolin PV67 can only be used on bare timber and timber stained with a low build wood stain which has dried properly. To ensure compatibility we recommend making a trial application.

Resistant to wear, scratch, scuff and chemicals, thereby ensuring exceptional durability and long term maintenance.

Floor, previously treated with PV67, where the finish is in good conditions only need to be sanded lightly before the application of Sadolin PV67 as long as the surface is free from gease, polish etc.

If the previous floor finish contains wax, has been damaged or is very uneven the floor should be sanded back to bare wood. All resinous wood has to be treated immediately after sanding to bare wood. Pine wood with a large amount of heartwood has to be sealed with Sadolin PV67 Sealer to avoid a reddish tinge.

If Sadolin PV67 is applied on stained floor, please make sure that the stains sre solvent based and have dried properly, normally for 3-5 days.

Shake the containers well before mixing. Mix sufficiently material in a ratio of 10 part of Sadolin PV67 to 1 part of Sadolin Hardener. Avoid forming air bubles during the mixture. The mixture can be stored for up to 24 hours in closed container kept at temperatures at 20 ํ C.

Apply Sadolin PV67 evenly and slowly to avoid the formation of air bubbles by using a brush or mohair roller. Avoid sanding between the coats except when the removal of dust or dirt is necessary.