| Preparation
: |
Previously treated floors
where the finish is in good conditions only
need to be sanded lightly before the application
of Sadolin samba as long as the surface is
free from grease, polish etc.
If the previous floor finish contains wax,
has been damaged or is very uneven, the floor
should be sanded back to bare wood. All resinous
wood has to be treated immediately after sanding
to bare wood. |
| Application
: |
New timber or surfaces
sanded back to bare timber should be primed
with a coat of Sadolin Samba thinned with
white spirit in the ratio of 1 part white
spirit to 9 parts Sadolin Samba
Stir well before and during application and
apply with a brush or roller. Do not apply
at temperatures below 5 í C Apply 2-3 coats
depending on the finish and the durability
required. |
| Coverage
: |
Approximately 12-15 m2/litre
on planed wood. |
| Drying
Time : |
Touch dry: 2-4 hours
Repainting: Suitable for repainting in 5-7 hours. |
| Cleaning
: |
Clean the brushes immediately
after use in white spirit and afterwards in
soapy water. |
| Important
Information : |
Protect from frost. Shelf
life: (Unopened) at least 5 years from production
date.
Please refer to The Technical Data Sheet for
detailed information.
|
| Manufactured
by : |
Sadolin Woodcare A/S, Holmbladsgade
70, DK-2300 Copenragen S |
