Flexicoat is a one pack roof coating. It provides a hightly flexible waterproof coating with excellent weather resistance. Flexicoat has long lift flexibility and is ideally suitable for use in areas with extreme climatic conditions. A special mould resistant version is available for areas of hight temperature and humidity, and a thermal version is available for use in areas of extreme heat and cold. It is applied by brush or sprey and after drying can be walked open uncovered.

PROPERTIES:

Flexicoat
Flexicoat is a blend of weather resistant pigments, Fillers and acrylic ester resins.

Flexicoat Mould Resistant
Flexicoat Mould Resistant is specially formulated for use in tropical areas of hight temperature and humidity. It contains a premium Funggicide/Algaecide to project the coating from microbial atteck for up to 5 years.

Flexicoat Thermo
Flexicoat Thermo contains hollow light microspherical filler, which upgrades the thermal insulation of substrates over which it is applied, giving considerable cost savings in very hot and cold countries.



 
ADVANTAGES :

- Weatherproof and weatherproof coating.
- Allows surface to breath while remaining strongly anchored to the substrate.
  Provides a seamless coating.
- High flexibility.
- Fast drying.
- Reflects Ultra – Violet (light) rays.
 
PREPARATION OF SURFACE:


Ensure dust, dirt and foreign matter are removed from roof surfaces. All cracks should be made good with TERRACO Acrylic Filler.
Before overcoating old substrates in humid tropical areas surfaces should first be washed down with a solution of household bleach 12 hours before recoating to prevent the re-growth of fungi and algre.

 
 
AREA OF USE:

Flexicoat is designed for application on roofs constructed for application on roofs constructed froom a wide vaeiety of materials, i.e. concrete, light weight concrete, roof tiles, wood, galvanised steel and asbestos cement.
 
 
PRIMING :

If substrate is porous, it is best to use Terraco Penetrating Primer prior to Flexicoat application.
 
 
HEALTH AND SAFETY :

Avoid prolonged contact with eyes and skin. For detailed information refer to relevent material safety data sheet.
 
 
PACKAGING AND STORAGE:

Flexicoat is supplied in 20 ltr. Conipails and gallon cans. Protect from extremes of temperature. Shelf life is a minimum of 12 month in manufacture’s sealed container. Use oldest material first.
 
 
APPLICATION AND CLEANING OF TOOLS:

Flexitex can be applied by sprey or rooler to achieve the required texture. Apply 2 coats diluting the required texture. Apply 2 coats diluting the first coat with 20% of water. The second coat should not be diluted.
All tools should be cleaned with water after use.
 
 
TECHNICAL SERVICE:

TERRACO offers a comprehensive range of products and services for most finishing needs. Please contact the TERRACO Technical Service Department or your local TERRACO agent for further information, samples, demonstrations and instructor services.
The information given in this website is based not only on work in our laboratories but also on practical experience obtained during field work.
All products are sold subject to standard conditions of sale which are available on request. This information is based on TERRACO's present state of knowledge and is intended to provide general information on TERRACO's products and their methods of use. The prospective user is recommended to determine the suitability of TERRACO's suggestions and products before adopting them on a commercial scale.

 
 
Technical data
 
PRODUCT : Weatherproof flexible roofing compound.
BINDERS : Styrene/Acrylic Ester.
FILLERS : Crushed and precisaly graded fillera.
PIGMENTS   Weather resistant pigments.
DRYING TIME : 6 hours between coats.
PH : 7.5-8.0
% SOLID : 66.5-68.5
VISCOSITY : 2300-2700 CPS/25 C
SPECIFIC GRAVITY : 1.3 – (Thermo grade 1.0)
COLOURS : White, Grey, Stone, Other colours are available on request with suffcient order quentites.
CONSUMPTION : 0.5-1 m2 / ltr.
PACKAGING : 20 litre conipails and gallon cans.
STORAGE :
Minimum 12 months in original sealed containers.
  :  

 


Home | Jotun | ICI | Sadolin | Teracco | Oxygen & Industrial Gas | Equipment | Services | Order | Contact us
© 2003 ANS Group. All rights reserved. Design by IT Portal