|
|
| |
Handycoat Exterior is a ready to use filler for
use on all common building surfaces, including timber,
tt gives a high quality, even surface for painting.
Handycoat Exterior is specifically manufactured
for the painter to repair and touch up exterior
and interior surfaces, both new and old, prior to
painting. It is designed for filling joints, hairline
cracks etc. by hand application. Unlike conventional
fillers, Handycoat Exterior has elastic properties,
does not flake off, is permanent and retains its
adhesion.
|
| |
|
| PROPERTIES:
Handycoat Exterior is a quick drying ready-mixed
paste formulated using acrylic binders and precisely
graded white marble powder.
|
AREA
OF USE:
Handycoat Exterior
is suitable for exterior as well as interior surfaces.
When dry, Handycoat Exterior is weather resistant
and bonds extremely well to cementitious materials,
gypsum, gypsum boards, sprayplaster, wood, galvanised
and primed anti-rust steel surfaces etc.
As a thin coat filler for patching hairline cracks
in walls, ceilings, soffits, repair to damaged plasterwork,
paintwork, filling holes and defects in woodwork,
making good to exposed concrete, filling of dents
in galvanised and anti-rust primed metal.
|
| |
| PREPARATION
OF SURFACE: |
Ensure dust, dirt, foreign matter are brushed away.
Ridges and form oil should be removed. When applying
filler to old painted surfaces first wash down with
soda / water solution, rinse and allow to dry before
filling. To stabilise a surface which shows signs
of dusting or flaking, the use of Penetrating Primer
is recommended |
| |
| |
| APPLICATION: |
|
Apply the filler in a thin, even layer; if the area
under repair requires a thick coat, then apply several
thin layers, allowing each layer to dry before adding
the next. Lightly sandpaper over the dry final surfacebefore
painting preferably within 24 hours of application.
|
| |
| |
| HEALTH
AND SAFETY: |
Avoid prolonged contact with eyes and skin. For detailed
information refer to relevant material safety data
sheet. |
| |
| |
| PACKAGING
AND STORAGE: |
Handycoat Exterior is supplied in 25kg and 5kg plastic
containers. Store containers in a clean dry area protected
from direct sunlight and extreme heat and cold. Do
not allow material to freeze. Unopened containers
can be stored for 12 months. Use oldest material first.
|
| |
| |
| TECHNICAL
SERVICE: |
TERRACO offers a comprehensive range of products
and services for finishing needs. The TERRACO Technical
Service Department or local TERRACO agent will provide
further information,samples, demonstrations and
instructor services on request.
The information given in this leaflet is based not
only on work in our laboratories but also on practical
experience obtained during field work. All products
are sold subject to standard conditions of sale
which are available on request.
This information is based on TERRACO's present state
of knowledge and is intended to providegeneral information
on TERRACO's products and their methods of use.
The prospective user is recommended to determine
the suitability of TERRACO's suggestions and products
before adopting them on a commercial scale
|
| |
| |
| Technical
data : |
| |
| PRODUCT |
: |
Ready mixed quick drying filler
for construction surfaces. |
| BINDERS |
: |
Acrylic copolymer. |
| FILLERS |
: |
Fine precisely graded fillers. |
| DILUTION |
: |
With water if required. |
| COVERAGE |
: |
0.5 -1.5kg/m2 depending on substrate
conditions. |
| LAYER THICKNESS |
: |
max 2mm/ layer. |
| SPECIFIC GRAVITY |
: |
1.75 |
| COLOUR |
: |
White. |
| DURABILITY |
: |
Negligible shrinkage. |
| STANDARD COMPLIANCE |
: |
ASTM C-475 |
| TOXICITY |
: |
Non-toxic. |
| STORAGE |
: |
12 Months
in clean dry conditions in original
unopened containers.
|
| PACKAGING |
: |
25 and 5 kg pails |
| |
: |
|
|
| |
| |
|
|
|
