Handycoat Interior is a range of ready to use fillers and board jointing compounds for most building surfaces, including sand/cement render and gypsum board. It gives a high quality, even surface for painting. Handycoat is specially manufactured for the painter to repair and touch up surfaces, both old and new, prior to painting.

PROPERTIES:
Handycoat is made from a selected blend of acrylic polymers and precisely graded fillers. It is:
• Easy to use.
• Does not flake off.
• Has high adhesion power.
• Applicable up to 4mm in thickness.
• Has high coverage.
• Quick drying.
• Vapour permeable

Handycoat Interior
Handycoat Interior is a general purpose grade for use on most interior construction surfaces.

Handycoat Washable
Handycoat Washable withstands dampness and condensation and is ideal for use in kitchens and bathrooms.

Handvcoat CS
Handycoat CS is formulated on special fillers which allow the surface to be polished when dry.

Handvcoat Exterior
Handycoat Exterior is weather resistant and bonds extremely well to cementitious materials, gypsum, gypsum boards, sprayplaster, wood, galvanised and primed anti-rust steel surfaces etc.

When dry, Handycoat bonds extremely well to, cementitious materials, gypsum, gypsum boards, sprayplasters, wood, galvanised steel lathings and all common building surfaces. Ideal as a gypsum board jointing compound and skimcoat, for patching hairline cracks in walls, ceilings, repairing damage to plaster/paint work, nail holes in woodwork, making good around door architrave's and along the top of skirting boards.

Apply the filler in a thin even layer. If a thick coat is necessary, apply several thin layers, allowing to dry between layers. Lightly sand the final surface before painting, within 24 hour of application. Clean all tools and splashes with water, immediately after application is completed.

HEALTH AND SAFETY:
Avoid contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

PACKAGING AND STORAGE:
Handycoat is supplied in 5kg, 25kg plastic containers and 25kg plastic bags. Store containers in a clean dry area protected from direct sunlight and extreme heat and cold. Do not allow material to freeze. Unopened containers can be stored for 9 months. Use oldest material first.

TERRACO offers a comprehensive range of products and services for most finishing needs. Please contact the TERRACO Technical Service Department or your local TERRACO agent for further information, samples, demonstrations and instructor services.
The information in this leaflet is based not only on work in our laboratories, but also on practical experience obtained during fieldwork. All products are sold subject to standard conditions of sale, which are available on request. This information is based on TERRACO's present state of knowledge and is intended to provide general information on TERRACO's products and their methods of use. The prospective user is recommended to determine the suitability of TERRACO's suggestions and products before adopting them on a commercial scale.